Spall TXGel

TX Gel is a quick curing non sag concrete repair material. TX Gel is a 1:1 product that begins as a liquid, and then blends to form a high build patch material that can be troweled or ground flush. These unique properties allow TX Gel to be easily pumped with either a hand tool or plural component pump. TX Gel is traffic ready within 60 minutes and can be color matched to any color.

Rebuilding control joints
Shallow spalls on bridge decks
Traffic area spalls & crack repairs
Grade matching
Floor repair
Stops additional damage
Fill & repair spall before coating

100% Solids, No VOC's
Meets USDA and FDA Requirements
Meets USGBC LEED Criteria – IEQ4.1
Cures from -20°F to 130° F.
“Drive-Over” in 30 minutes
Produces High Strength Quickly
Self Priming
Fast initial set; rapid gain to ultimate strengths.
Custom Colors Available

Viscosity (Mixed).............................................Non Sag
Hardness, durometer (ASTM D2240)............67 to 76D
Tensile Strength, PSI (ASTM D412)......................5000
Elongation % (ASTM D412)...................................11%
Compressive Strength (neat)...........................3500 psi
Bond Strength (ASTM 882-99)........................3450 psi

22 oz. Cartridges
7 Gallon kit (used with Hi-Tech SB2005/2009 pump)
10Gallon kit (used with Hi-Tech SB2005/2009 pump)