• Polyurea material being oured into a pump
  • Polyurea Joint Filling
  • Polyurea crack repair material 10 Gallons
  • Polyurea crack repair material 22oz cartridge

The HT-PE 85 M.I. is a technologically advanced, self leveling, 100% solids, two component, 1:1 ratio, Polyurea Elastomer joint and crack filler. Designed for concrete with low to medium thermal cycling. HT-PE 85 M.I. cures rapidly and consistently in applications ranging from -20ºF to 130ºF. Product is tack free in 5 to 15 minutes. Applications can be reopened to vehicle or foot traffic in 1 hour.

Data Sheet:

Industrial Facilities
Warehouse Floors
Manufacturing Facilities
Pulp and Paper Mills               
Bottling and Canning Facilities             
Airports
Water and Waste Water Treatment
Cold Storage Facilities
Food Processing Facilities
Freezers


Demonstration Videos:

      

100% Solids, Contains No VOC's.
Can be polished without smearing
Meets USDA & FDA Requirements
Return Project to Service in 60 Minutes
Cures From -20ºF to 130ºF
Odorless, No Toxic Vapors
Resistant to Petrochemicals
Remains Flexible, Even in Cold Temperatures

Color A+B                                                                      Concrete Gray
Viscosity (mixed)                                                          Self Leveling
Mix Ratio (by volume)                                                  1:1
Pot Life  100 grms at 77°F                                          1 min
Tack Free (thin film) @ 77°F                                        3 min
Initial Cure                                                                     15 mins
Final Cure                                                                       60 mins
% of Elongation                      ASTM D-412                 190 min
Tensile Strength, psi              ASTM D-412                 960 min
Shore “A” Hardness                ASTM D-2240               85-87 A
Tear Strength, pli, Die C         ASTM D-624                195 min

22 oz. Cartridges
56 oz. Cartridges
10 gal. Units