The HT-PE65 is a technologically advanced, self leveling, non staining, 100% solids, two component, 1:1 ratio, Polyurea Elastomer joint filler. Designed for concrete with low to medium thermal cycling. HT-PE65 cures rapidly and consistently in applications ranging from -20ºF to 130ºF. Product is tack free in 3 minutes. Applications can be reopened to vehicle or foot traffic in 1 hour.

Data Sheet:

Grocery Stores
Department Stores
Industrial Facilities
Warehouse Floors
Manufacturing Facilities
Bottling and Canning Facilities
Airports
Cold Storage Facilities
Food Processing Facilities
Freezers


Demonstration Videos:

      

100% Solids, Contains No VOC’s
Can be Polished without Smearing
Meets USDA & FDA Requirements
Return Project to Service in 60 Minutes
Cures From -20ºF to 130ºF
Odorless, No Toxic Vapors
Resistant to Petrochemicals
Remains Flexible, Even in Cold Temperatures

Color A+B                                                                         Concrete Grey
Viscosity (mixed)                                                              Self Leveling
Mix Ratio (by volume)                                                     1:1
Pot Life  100 grms at 77°F                                              1 min
Tack Free (thin film) @ 77°F                                            3 min
Initial Cure                                                                        15 min
Final Cure                                                                          60 mins
% of Elongation                      ASTM D-412                    420 min
Tensile Strength, psi              ASTM D-412                    740 min
Shore “A” Hardness                ASTM D-2240                 65-67 A
Tear Strength, pli, Die C        ASTM D-624                   145 min

22 oz. Cartridges
56 oz. Cartridges
10 gal. Units